Welcome to Wuxi Jinwanli Electric Furnace Co., Ltd.
Industry News
Your position:首页 > NEWS > Industry News

Energy saving characteristics of intermediate frequency furnace

Update time:2015-12-24 20:06:30Click times:459
Energy saving characteristics of intermediate frequency furnace
Intermediate frequency furnace heating parts was 0.5 percent only oxidation burning loss, but the use of the gas furnace heating, there will be 2 percent oxidation burn, the extent of damage to the other heating equipment.
The heating speed is very fast, work efficiency than other heating equipment to highlight, and less use of oxidation and decarburization materials, intermediate frequency furnace can very good saves the material and production cost, but also to extend the service life of the mold processing. Because the induction heating of the intermediate frequency electric furnace is electromagnetic induction, the heat of the induction is mainly from the part of the process itself.
If melting furnace heating process is material saving, and burning coal stove, and probably heating per ton forging at least save steel reached 20 to 50 kg, the material utilization rate has reached 95 percent.
Under normal circumstances, the use of workers in the intermediate frequency furnace within ten minutes of work can be, so that continuous forging work tasks. Also do not need to have a special burning furnace workers in the workers do a good job in the work of the furnace and sealing furnace, which saves a lot of human resources. Because the heating rate of the intermediate frequency electric furnace is very quick, also make the item that is heated very little by oxidation.
(Edit:admin)
0 comments
Do not want to log on? Directly click on the release can be used as visitors message.
Consultation

Hotline:0510-85885425